Technical Information
Here we provide technical information regarding colours, screws, plastic, safety classes and materials.
Colours
Our standard colours for the materials PE and PA
| RAL | Description | PE | PA |
| 1002 | Sand yellow | + (A065) | + |
| 1011 | Brown beige | + (A006) | + |
| 1013 | Oyster white | + (A039) | - |
| 1015 | Light ivory | + (A064) | - |
| 1016 | Sulfur yellow | + (A050) | - |
| 1017 | Saffron yellow | + (A063) | 1- |
| 2001 | Red orange | + (A033) | + |
| 3000 | Flame red | + (A016) | - |
| 3020 | Traffic red | + (A005) | - |
| 5015 | Sky blue | + (A042) | + |
| 5017 | Traffic blue | + (A046) | + |
| 7001 | Silver grey | + (A052) | + |
| 7016 | Anthracite grey | + (A022) | + |
| 7032 | Pebble grey | + (A009) | + |
| 7035 | Light grey | + (A031) | +(A045) |
| - | Alu-grey (dark light grey) | + (A034/2) | - |
| 7037 | Dusty grey | + (A054) | + |
| 8001 | Ochre brown | + (A062) | + |
| 8016 | Mahogany brown | + (A061) | + |
| 8017 | Chocolate brown | + (A011) | + |
| 9003 | Signal white | + (A010) | +(A023) |
| 9005 | Jet black/ UV-resistant | + (A056) | + |
| 9005 | Jet black | + (A018) | + |
| 9006 ! | White aluminium (metallic - Attention! Flow lines can occur) similar to RAL 7042 |
+ (A014) | + |
| 9007 ! | Grey aluminium (metallic- Attention!) similar to RAL 7042 similar to RAL 7043 |
+ (A021) | + |
| 9010 | Pure white | + (A008/1) | +(A008/1 +A026) |
Specific quantities are required for a special production.
Still have not found the right colour?
Of course we can provide further colours on request.
Material
|
Material/ |
PPS | PA 6.6 | PA 6. GF30 | PA 6. | PS | ABS | PC |
| Density (g/cm³) | 1,65 | 1,14 | 1,35 | 1,13 | 1,05 | 1,05 | 1,2 |
| Absorption of water (%) | - | 1,3 | 1,5-2 | 1,4 | 0,1 | 1,0 | 0,35 |
| Continuous operating temperature (°C) | 180-200 | 80-110 | 90-120 | 80-100 |
65-80 |
75-85 | 100-120 |
| Vicat softening point (°C) | o | 150 | 215 | o | 90 | 96 | 145 |
| tensile stress at yield (N/mm²) | - | 85 | 95 | o | 26 | 35 | 63 |
| tensile modulus E (N/mm²) | 3200 | 6000 | o | 1850 | 2400 | 2400 | |
| Shore hardness D |
o | o | o | o | o | o | o |
| Shore hardness A |
o | o | o | o | o | o | o |
| Special flow resistance (Ohmcm) | 10^12 | 10^14 | 10^12 | 10^17 | 10^15 | 10^16 | |
| Flammability UL 94 | V0 | V2 | HB | HB | HB | HB | V2 |
| Resistant to grease, oils |
+ | + | + | + | -/+ | + | + |
| Resistant to petrol |
- | + | + | + | - | + | + |
| Resistant to ester/ alcohol | - | + | + | + | -/+ | -/+ | -/+ |
| Resistant to aromatic CKW's | - | - | - | - | - | - | o |
| Resistant to acid |
+/- | + | + | + | + | + | + |
| Resistant to lyes |
+ | - | - | - | + | + | o |
| Free from - silicone |
o | + | + | + | + | + | + |
| Free from - F(C)KW | o | + | + | + | + | + | + |
| Free form - heavy metals |
o | + | + | + | + | + | + |
| Free from - dioxin and furan | o | + | + | + | + | + | + |
| Free from - PCB's und PCT's | o | + | + | + | + | + | + |
| Free from - halogen |
o | + | + | + | + | + | - |
| Free from - asbestos |
o | + | + | + | + | + | + |
| food safe |
o | o | o | + | o | - | - |
| UV-resistance * | o | - | - | - | - | o | - |
| Material/ characteristics |
POM | PPN | PE-HD | PE-LD | PE- LD30 |
SEBS | TPE |
| Density (g/cm³) | 1,41 | 0,9 | 0,96 | 0,92 | 0,94 | 1,13 | 0,97 |
| Absorption of water (%) | 0,8 | o | - | - | - | - | - |
| Continuous operating temperature(°C) | 90-100 | 100-110 | 80-95 | 80-90 | 40-50 | 120-130 | 100-125 |
| Vicat softening point (°C) | 150 | o | 123 | 93 | 54 | o | o |
| tensile stress at yield (N/mm²) | 65 | o | 28 | 19 | o | - | 6,9 |
| tensile modulus E (N/mm²) | 2800 | o | o | 220 | o | - | o |
| Shore hardness D | o | 72 | 63 | 50 | 27 | 32 | - |
| Shore hardness A | o | o | o | 100 | 77 | 88 | 64 |
| Special flow resistance (Ohmcm) | 10^15 | 10^17 | 10^17 | 10^17 | o | - | 10^14 |
| Flammability UL 94 | HB | o | o | o | HB | - | HB |
| Resistant to grease, oils | + | -/+ | + | + | + | o | -/+ |
| Resistant to petrol |
+ | - | + | - | - | o | -/+ |
| Resistant to ester/ alcohol | + | -/+ | + | -/+ | -/+ | + | o |
| Resistant to aromatic CKW's | + | o | - | - | - | o | o |
| Resistant to acid |
- | + | + | + | + | + | + |
| Resisitan to lyes |
o | + | + | + | o | o | + |
| Free from - silicone |
+ | + | + | + | + | o | + |
| Free from - F(C)KW | + | + | + | + | + | o | + |
| Free from - heavy metals |
+ | + | + | + | + | o | + |
| Free from - dioxin and furan | + | + | + | + | + | o | + |
| Free from - PCB's und PCT's | + | + | + | + | + | o | + |
| Free from - halogen | + | + | + | + | + | + | + |
| Free from - asbestos | + | + | + | + | + | o | + |
| food safe |
o | o | o | o | o | o | + |
| UV-resistance | o | o | - | - | - | o | - |
Tolerances
Tolerances for plastic moldings nominal size range over...till in mm
| material code | code letter | 0...1 | 1...3 | 3...6 | 6...10 | 10...15 | 15...22 |
| PE-PP | A B |
±0,23 |
±0,25 ±0,16 |
±0,27 ±0,17 |
±0,3 ±0,2 |
±0,34 ±0,24 |
±0,38 ±0,29 |
| POM | A B |
±0,20 ±0,10 |
±0,21 ±0,11 |
±0,22 ±0,12 |
±0,24 ±0,14 |
±0,27 ±0,17 |
±0,30 ±0,20 |
| PA,PC,PS, | A B |
±0,18 ±0,08 |
±0,19 ±0,09 |
±0,20 ±0,10 |
±0,21 ±0,11 |
±0,23 ±0,13 |
±0,25 ±0,15 |
| material code | code letter | 22...30 | 30...40 | 40...53 | 53...70 | 70...90 | 90..120 |
| PE-PP | A B |
±0,43 |
±0,49 ±0,39 |
±0,57 ±0,47 |
±0,68 ±0,58 |
±0,81 ±0,71 |
±0,97 ±0,87 |
| POM | A B |
±0,34 ±0,24 |
±0,38 ±0,28 |
±0,43 ±0,33 |
±0,50 ±0,40 |
±0,60 ±0,50 |
±0,70 ±0,60 |
| PA,PC,PS, | A B |
±0,27 ±0,17 |
±0,30 ±0,20 |
±0,34 ±0,24 |
±0,38 ±0,28 |
±0,44 ±0,34 |
±0,51 ±0,41 |
A or not tool-bound dimensions; B for tool-bound dimensions
Information to screws and plastic
Excerpt from the new standards DIN3481X tightening torques:Guide values for appropriate tightening torques for humidity 1) Screws made of polyamide 66 with 20 °C
|
thread |
M3 | M4 | M5 | M6 | M8 | M10 |
|
MA, Nm |
0,1 | 0,25 | 0,5 | 0,8 | 1,8 | 3,5 |
1) humid = after storage in standard climatic conditions (DIN 50014)
until the moisture balance is regulated
Tolerance zone from the extermal thread
|
thread |
M3 | M4 | M5 | M6 | M8 | M10 |
|
MA, Nm |
6e | 6e | 6g | 6g | 6g | 6g |
For the remaining limit deviations counts DIN EN ISO 4759-1, pdoruct class C. For the form and position must be hold on the tolerances according to DIN EN 1S0 4759-1.
Compostition of protection types according EN 60529
| Composition of protection types according EN 60529 | ||||||||||||
| 2. characteristic | ||||||||||||
| Protection against ingress of water | ||||||||||||
| 1. characteristic | not protected |
protected agaist dripping water | protected agaist dripping water, if casing is inclinated up to 15° |
protected against spray water | protected against splash water |
protected against water jets |
protected against strong water jets | Protection when submerged under water | Protection when submerged under water with elevated pressure | |||
| Protection against foreign objects | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||
| not protected |
0 | IP | 00 | |||||||||
| protected against solid foreign objects >=50mm diameter | 1 | IP | 10 | 11 | 12 | |||||||
| protected against solid foreign objects >=12,5mm diameter | 2 | IP | 20 | 21 | 22 | 23 | ||||||
| protected against solid foreign objects >=2,5mm dieameter | 3 | IP | 30 | 31 | 32 | 33 | 34 | |||||
| protected against solid foreign objects >=1,0mm diameter |
4 | IP | 40 | 41 | 42 | 43 | 44 | |||||
| protected against dust |
5 | IP | 50 | 54 | 55 | |||||||
| dustproof |
6 | IP | 60 | 65 | 66 | 67 | 68 |